Approximate values: A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to UNE-EN 1024.
Note: If the roof tiles are installed on battens, the useful length must be calculated on site. It must be installed in compliance with the UNE EN-136020 standard for the design and assembly of roofs with ceramic roof tiles and the Tejas Borja specifications.
* Consult the table of minimum slopes depending on the length of the roof and the geographical area (Standard UNE-136020). In zone 1 (protected area), arranged in staggered formation with waterproof laminate and batten distance of 340 mm on a skirt of up to 6.5 m. Check pitch pannel according to the roof length and the geographical area according to UNE-EN 136020.
** The roof tiles have a minimum order requirement and must be purchased in multiples of that amount.
Description
The FLAT-5XL is another example of the innovation, development and improvement of our products which, together with our exclusive BorjaJET finishing technology, can make architects’ impossible dreams a reality.
The largest ceramic roof tile ever made.
- High performance in installation (5 units/sq.m.)
- Wide range of finishes (BorjaJET exclusive)
FLAT-5XL BorjaJET is a product award-winning of Red Dot Award: Product Design 2019
TEJAS BORJA, S.A.U. guarantees that its ceramic tiles are free of any manufacturing faults (including frost resistance) during 50 years after their manufacture.
Flat-5XL Premium Tiles
Details BorjaCAD
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
The evaluation report ICC-ES is issued for products that meet the international and residential building codes (IBC and IRC), valuing the covering properties on the roof, fire rating and wind resistance.
When installed in compliance with the report, they are a class A roof.
