Approximate values: A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to UNE – EN 1024.
Type: Double lateral overlapping and double longitudinal overlapping.
Note: If the roof tiles are installed on battens, the useful length must be calculated on site. It must be installed in compliance with the UNE EN-136020 standard for the design and assembly of roofs with ceramic roof tiles and the Tejas Borja specifications.
* Consult the table of minimum slopes depending on the length of the roof and the geographical area (Standard UNE-136020).
** The roof tiles have a minimum order requirement and must be purchased in multiples of that amount.
The TB-10 Tech tile has a low slope certificate (AFNOR – faible pente). Please note that this type of roof is not intended for use in mountain climates (altitude > 900 m).
Description
The TB-10 Tech roof tiles is the technological evolution in the large size S-interlocking tile format. We have made improvements in the manufacturing and development process to give the roof tile even greater definition and make it completely watertight. Ideal for architectural projects anywhere in the world.
- Adapts to various batten spacings.
- Longitudinal and transverse double fit.
- Curved tile aesthetic.
TEJAS BORJA, S.A.U. guarantees that its ceramic tiles are free of any manufacturing faults (including frost resistance) during 50 years after their manufacture.
Details BorjaCAD
The certified characteristics for the NF Terracotta tiles are compliant with the requirements of the NF EN 1304 standard: Structural faults, the geometric characteristics , resistance to flexural strength , impermeability (class 1), frost resistance according to the NF EN 539-2 standard for all products made with red mixture.
AFNOR Certification: 11 rue Francis de Pressensé // 93571 LA PLAINE SAINT-DENIS CEDEX // www.marque-nf.com
AFNOR certification ensures conformity with the requirements of the French standard applicable to each product, demonstrates compliance with the requirements of the customers as well as the applicable regulations where applicable.
AFNOR certified fired clay tiles and special pieces are suitable for roof covering and vertical wall cladding in the French market.
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
The certified characteristics for the NF Terracotta tiles are compliant with the requirements of the NF EN 1304 standard: Structural faults, the geometric characteristics , resistance to flexural strength , impermeability (class 1), frost resistance according to the NF EN 539-2 standard for all products made with red mixture.
AFNOR Certification: 11 rue Francis de Pressensé // 93571 LA PLAINE SAINT-DENIS CEDEX // www.marque-nf.com
AFNOR certification ensures conformity with the requirements of the French standard applicable to each product, demonstrates compliance with the requirements of the customers as well as the applicable regulations where applicable.
AFNOR certified fired clay tiles and special pieces are suitable for roof covering and vertical wall cladding in the French market.
The certification MIAMI-DADE is issued under government rules implementing products for construction in Miami Dade County and other dependent areas.
MIAMI-DADE conformity shows that certified products have been tested and meet building regulations (ASTM C 1167), being designed according to technical Florida Building Code High Speed hurricanes.
The evaluation report ICC-ES is issued for products that meet the international and residential building codes (IBC and IRC), valuing the covering properties on the roof, fire rating and wind resistance.
When installed in compliance with the report, they are a class A roof.
