Approximate values. The values of the roof tile dimensions admit a tolerance of ±2% according to UNE-EN 1024.
Note: Step 50/45 roof tile is considered decorative accessory used to complement the roof. Therefore is included in AENOR certificates of the C-50.21 Celler roof tile (see accessories).
Ideal dry installation using C-50.21 Celler and Step 50/45 roof tiles.
It must be installed in compliance with the UNE EN-136020 standard for the design and assembly of roofs with ceramic roof tiles and the Tejas Borja specifications.
* Consult the table of minimum slopes depending on the length of the roof and the geographical area (Standard UNE-136020).
** The roof tiles have a minimum order requirement and must be purchased in multiples of that amount.
Description
Step 50/45 roof tile with nibs on its underside, is placed in the pan position, essential for the proper drainage of water in the C-50.21 Celler and C-45.20 curved roof tiles roofs by dry-installed on battens or continued support. It also is equipped with a hole to secure nail or screw through the batten.
To ensure their optimal installation, big format of curved roof tile (C-50.21 Celler and C-45.20) should be installed using the STEP 50/45 as a pan and should be fixed to a support previously prepared with a double batten layout.
Watch video for fitting instrutions on YouTube.
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.