Approximate values: A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to UNE-EN 1024.
Note: It must be installed in compliance with the UNE EN-136020 standard for the design and assembly of roofs with ceramic roof tiles and the Tejas Borja specifications. If the roof tiles are installed on battens, the useful length must be calculated on site.
* Consult the table of minimum slopes depending on the length of the roof and the geographical area (Standard UNE-136020). In zone 1 (protected area), arranged in staggered formation with waterproof laminate and batten distance of 365 mm on a skirt of up to 6.5 m.
** The roof tiles have a minimum order requirement and must be purchased in multiples of that amount.
Description
FLAT-10 is a new generation of flat tiles now lighter and with greater definition. Its new deeper joins make this format the perfect choice for all kinds of projects. They can be used on any of the 5 continents in both sloping roofs and facades. Combined with BorjaJet finishes they give a singular character to any architectural design.
- Perfect, deep fit.
- Large format – 10 units per sq. m.
- Exclusive finishes BorjaJET.
- Posibility of placement both staggered as continuous joint*.
- Lightweight.
TEJAS BORJA, S.A.U. guarantees that its ceramic tiles are free of any manufacturing faults (including frost resistance) during 50 years after their manufacture.
Details BorjaCAD
The certified characteristics for the NF Terracotta tiles are compliant with the requirements of the NF EN 1304 standard: Structural faults, the geometric characteristics , resistance to flexural strength , impermeability (class 1), frost resistance according to the NF EN 539-2 standard for all products made with red mixture.
AFNOR Certification: 11 rue Francis de Pressensé // 93571 LA PLAINE SAINT-DENIS CEDEX // www.marque-nf.com
AFNOR certification ensures conformity with the requirements of the French standard applicable to each product, demonstrates compliance with the requirements of the customers as well as the applicable regulations where applicable.
AFNOR certified fired clay tiles and special pieces are suitable for roof covering and vertical wall cladding in the French market.
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
The certified characteristics for the NF Terracotta tiles are compliant with the requirements of the NF EN 1304 standard: Structural faults, the geometric characteristics , resistance to flexural strength , impermeability (class 1), frost resistance according to the NF EN 539-2 standard for all products made with red mixture.
AFNOR Certification: 11 rue Francis de Pressensé // 93571 LA PLAINE SAINT-DENIS CEDEX // www.marque-nf.com
AFNOR certification ensures conformity with the requirements of the French standard applicable to each product, demonstrates compliance with the requirements of the customers as well as the applicable regulations where applicable.
AFNOR certified fired clay tiles and special pieces are suitable for roof covering and vertical wall cladding in the French market.
The certification MIAMI-DADE is issued under government rules implementing products for construction in Miami Dade County and other dependent areas.
MIAMI-DADE conformity shows that certified products have been tested and meet building regulations (ASTM C 1167), being designed according to technical Florida Building Code High Speed hurricanes.
The evaluation report ICC-ES is issued for products that meet the international and residential building codes (IBC and IRC), valuing the covering properties on the roof, fire rating and wind resistance.
When installed in compliance with the report, they are a class A roof.
SKG-IKOB is the Dutch certification body for the building and construction industry.
An SKG-IKOB certified product demonstrates quality and provides independent and external assurance that your product meets the agreed requirements.
A product certificate is awarded after positive results in random checks of the product, the production process, the quality system and series production.
An assessment guide (BRL) is a standardised document that SKG-IKOB uses to assess a specific product or process. The BRL includes not only the applicable legal requirements and (performance) requirements of the Construction Decree, but also the technical and aesthetic requirements set by market participants.
KOMO Quality Mark for the building industry
The KOMO Quality Mark is a guarantee of quality objectively and repeatedly assessed by an independent expert party (certification institute).
The KOMO certification is an international quality standard that provides guarantees for both the supply and demand sides of the building industry. It is a highly trusted quality mark that contributes to quality and safety and declares fitness for use through third party control.
Products with KOMO certificate distinguish themselves with their quality objectively tested by independent experts.
